BNNNB - AZ 61A H1287 MAGNESIUM WELDING WIRE
- MSDS: BNNNB
- Manufacturer: J W HARRIS CO INC
- Product Name: AZ 61A H1287 MAGNESIUM WELDING WIRE
- National Stock Number: 3439-00N018815
Product Identification
Product ID:AZ 61A H1287 MAGNESIUM WELDING WIRE
MSDS Date:07/01/1990
FSC:3439
NIIN:00N018815
MSDS Number: BNNNB
Responsible Party
CINCINNATI, OH 45242
US
Emergency Phone: 513-891-2000/800-424-9300(CHEMTREC)
Info Phone: 513-891-2000
Cage: 27911
Contractor
Telephone: 513-891-2000
Cage: 27911
Ingredients
MANGANESE
CAS: 7439-96-5
RTECS: OO9275000
Fraction By Weight: 0.15%
OSHA PEL (C) 5 MG/M3 DUST
ACGIH TLV: 5 MG/M3 DUST 9293
& AMT OF VENT, THE POSITION OF THE OPER HEAD
RTECS: 9999999ZZ
CONTAM IN THE ATMOSPHERE (SUCH AS CHLORINATED
RTECS: 9999999ZZ
THE FILLER METAL IS CONSUMED, THE FUME & GAS DECOMP
RTECS: 9999999ZZ
THE SOLID WIRE OR ROD INGREDS. FUME & GAS DECOMP
RTECS: 9999999ZZ
IMPORTANT. THE CONC OF A GIVEN FUME/GAS COMPONENT MAY
RTECS: 9999999ZZ
IN THE FILLER METAL. DECOMP PRODS OF NORMAL OPER
RTECS: 9999999ZZ
PROT, APRONS, HATS, SHOULDER PROT, DARK
RTECS: 9999999ZZ
TO SHIELD OTHERS.
RTECS: 9999999ZZ
ZINC OXIDE; (ZINC (OXIDE))
CAS: 1314-13-2
RTECS: ZH4810000
Fraction By Weight: 1.0%
OSHA PEL 15MG/M3 TDUST/5 FUME
ACGIH TLV: 10MG/M3 TDUST; 9293
MAGNESIUM OXIDE; (MAGNESIUM (OXIDE FUME))
CAS: 1309-48-4
RTECS: OM3850000
Fraction By Weight: BALANCE
OSHA PEL 15 MG/M3 PARTICULATE
ACGIH TLV: 10 MG/M3;TDUST; 9293
ALUMINUM; (ALUMINUM (WELDING FUME))
CAS: 7429-90-5
RTECS: BD0330000
Fraction By Weight: 6.5%
OSHA PEL 15MG/M3 DUST;5 FUME
ACGIH TLV: 10MG/M3 DUST;5 FUME
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACTUAL EXPOS SHOULD BE DETERMINED BY
MONITORING FUME IN OPERATOR'S BREATHING ZONE. ARC RAYS - FROM
ELECTRIC ARC WELDING OPERATIONS CAN INJURE EYES AND BURN SKIN.
ELECTRIC SHOCK - FROM ARC WELDING EQUI PMENT CAN KILL. HEAT RAYS -
INFRARED RADIATION FROM FLAME OR HOT METAL CAN INJURE EYES. NO
SPECIFIC (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: DATA IS AVAILABLE FOR MAGNESIUM FUME.
FUME & DUST WOULD BE CONSIDERED IRRITANTS. ZINC FUME MAY CAUSE
METAL FUME FEVER. LONG TERM EXPOSURE TO GENERAL WELDING FUME,
GASES, OR DUST MAY CONTRIBU TE TO PULMONARY IRRITATION OR
PNEUMOCONIOSIS.
Medical Cond Aggravated by Exposure:INDIVIDUALS WITH IMPAIRED PULMONARY
FUNCTIONS OR ILLNESS MAY HAVE SYMPTOMS EXACERBATED BY FUME
IRRITANTS.
First Aid
First Aid:INHAL: REMOVE FROM DUST OR FUME EXPOSURE. IF BREATHING HAS
STOPPED, PERFORM ARTF RESP. CALL MD IMMED. INGEST: CALL MD
IMMEDIATELY . EYES: IMMEDIATELY FLUSH EYES W/POTABLE WATER FOR A
MINIMUM OF 15 MINUTES, SEEK ASSISTANCE FROM MD SKIN: FLUSH WITH
COPIOUS AMTS OF WATER. CALL MD .
Fire Fighting
Flash Point:NONFLAMMABLE
Extinguishing Media:USE MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WHEN HEATED IN AIR TO TEMP NEAR MELTING
PT,MAGNESIUM ALLOYS IGNITE/BURN W/WHITE FLAME.USE OF WATER ON
MOLTEN MAGNESIUM WILL PRODUCE HYDROGEN GAS & CAUSE EXPLO.
Accidental Release
Spill Release Procedures:NONE SPECIFIED BY MANUFACTURER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:TRAIN EMPLOYEE TO KEEP HIS HEAD OUT OF THE FUMES.
Exposure Controls
Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRABLE FUME
RESPIRATOR OR NIOSH/MSHA APPROVED AIR SUPPLIED RESP WHEN WELDING IN
CONFINED SPACE OR WHERE LOCAL EXHAUST OR VENT DOES NOT KEEP EXPOS
BELOW TLV.
Ventilation:USE ENOUGH VENT & LOC EXHST AT ARC TO KEEP FUMES & GASES
Eye Protection:PROT SCREENS/FLASH GOGG IF NEC, (ING 12)
Other Protective Equipment:WEAR WELDING HELMET W/FILTER LENS OF APPROP
SHADE NUMBER (SEE ANSI/ASC Z49.1-SECTION 4.2).HEAD & BODY PROT, ARM
(ING 11)
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
HAZ DECOMP PRODS:WELDED, THE PROCESS, PROCEDURES & FILLER METALS USED.
OTHER CNDTNS WHICH ALSO INFLUENCE THE COMPOSITION & QTY OF FUMES &
GASES TO WHICH WORKERS MAY BE EXPSD INCL: COATINGS ON THE META L
BEING WELDED (SUCH AS PAINT, PLATING/GALVANIZING), THE NUMBER OF
OPER & VOLUME OF WORK AREA, THE QUALITY (ING 5)
Chemical Properties
HCC:N1
Melt/Freeze Pt:M.P/F.P Text:940F,504C
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Stability
Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:WELDING FUMES/GASES CANNOT BE
CLASSIFIED SIMPLY.THE COMPOSITION & QTY OF BOTH ARE DEPENDENT UPON
METAL BEING (SUPP DATA)
Disposal
Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH FEDERAL,
STATE AND LOCAL REGULATIONS .
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.